How to Properly Maintain a Used School Bus 

how to maintain a used school bus

Maintaining a used school bus is essential, especially a used school bus if you want to make the most out of its life. Proper used school bus maintenance will not only extend the school bus’s life but it will also make its operation less painful, less of the breakdowns, less mechanical headaches. If you properly maintain your bus you will also protect the lives of your riders. The first thing to know is that proper maintenance is regular maintenance. You have to regularly check for any issues in your school bus.

Here are some guides on how to properly maintain a used school bus after every trip.

1. Proper refueling

Refueling your school bus can seem like a no-brainer, but did you know there is a preferable way, more specifically, time to refuel your school bus. This is important if you want to properly maintain your used school bus. If possible, always try to refill your school bus in the evenings or nights rather than in the mornings before trips. We do this so that overnight condensation caused by water vapor in an empty fuel tank will not occur. The presence of water in the fuel will eventually cause harm to the engines in the long run. 

2. How to park the bus properly

At the end of the day, it is advised that after you set the parking brake and set the transmission to neutral, instead of quickly turning off the engines, you should let it slowly idle for some time, as directed by the manufacturer’s instructions. Letting the engine of your school bus slowly idle will lubricate all the parts, which is especially important for diesel vehicles, which most school buses are. 

3. Inspecting the interior

It is always a good habit to check your interior after every trip. The most convenient time to do this is while your engines idle after the trip. Use that tie to check for any interior damage to the seats and windows. If possible, fix the damages before the next trip. Also, check the seats for sleeping students, any lost books or items and properly secure them. 

4. Maintain Proper Hygiene With Your Used School Bus

Maintaining proper bus hygiene is always a good thing. Sweep the floors and steps. This will encourage a clean bus policy. And also, wash the interior of the school bus periodically, including seats, windows, fabrics, floor rugs etc. 

5. Inspecting the exterior

Always inspect the exterior for any possible damages. Check for burned-out bulbs, deformed body panels, even the school bus’s underbody if possible, or any other issues that may need to be repaired. If the repairs are quick and easy, you can do them right away or get a professional mechanic for more intricate repairs.

By the time all the inspection is done, the engine should have idled long enough, get in the bus, turn off all the electrical components, shut off the engines, remove the keys and properly secure the bus until your next trip.

Regular inspection will help you catch any little problems before they grow into more complicated problems.

Following these steps regularly should ensure that your bus remains healthy and you experience a hitch-free time while it is alive.

Tips on Preparing Your Used School Bus for Sale

preparing your school bus for sale

 Have a used school bus you want to sell? Here are some things you need to know.

Selling a used school bus or going into the school bus resell business is not so straightforward. Here are some things you need to know to provide the best quality product to your buyers.

  1.     Buy the Used School Bus That People Want to Buy

It is essential that you buy a bus that is selling on the resale market, a bus that buyers ant. Find out what a buyer might want in their school buses, some features may not be necessary for you, but they are to your buyers. So consider that. Buyers are always interested in the unique safety features and technologies that will protect their passengers and keep the bus current with the times.

Going in for a clean, non-polluting bus option will also be of great help when reselling. Buyers want something that is as clean as possible to the environment, and you cannot go wrong with that.

  1.      Prepare Your Bus by Keeping Detailed Records

If you have a school bus you are planning to sell or buying a school bus to sell, keeping a detailed record of that bus’s maintenance is very much advised. Caring for that bus is critical if you are looking to get a high resale value. Buyers want to know what has been changed, altered, the bus’s condition, and how long the bus is expected to live. They want the confidence that you are selling something useful and of quality.

   Clean and Sanitize Your School Bus

When selling a used school bus, first impressions matter a lot. It is essential that when you are selling a bus, you are selling a clean school bus. You want to ensure the safety of the children that would ride on your bus.

When cleaning, pay close attention to the places that children are most likely to hold onto, The stability bars that run through the middle of the bus, the handlebars on the back of the seat, windows, window ledges, and the seats, etc.

Clean Your School Bus First

Before sanitizing the bus, you first of all have to clean it. Clean the bus’s floors and windows thoroughly, preferable with the use of a handheld vacuum cleaner that will suck out the dust rather than a broom that could spread the bus in the air. Investing in cleaning equipment for your school bus would be good. You could even install a HEPA filter in the vacuum cleaner to remove microbes and allergens from the surfaces.

You can also use soap and water for the floors, making sure to dry it off completely.

The next thing to look out for is the fabrics, carpets or rugs, window drapes, and seat covers. These fabrics have to be removed and cleaned separately in detergent and hot water and with a disinfectant. Always make sure the materials are completely dry before you put them back.

Also, clean the air conditioners and vents, wipe with a damp cloth and spray with a disinfectant.

Now You Can Disinfect The Bus

Once the cleaning is done, the next thing is to disinfect the bus. All surfaces have to be sanitized, paying close attention to the high contamination areas. Use an alcohol-based sanitizer for the disinfection. Wipe all surfaces with a clean cloth dipped in the sanitizer, then spray the disinfectant inside the bus.

Here are some sanitizing tips.

  •         While cleaning, always go from least soiled to the most soiled surface
  •         Sanitize before and after every trip
  •         Wear gloves while sanitizing
  •         Ensure COVID-19 safety measures are put into place

Following these basic guidelines should ensure you provide a safe product to the people that buy your bus.

Buying a Used School Bus? Here Are Some Tips for You

buying a used school bus

Buying a school bus can be a bit tricky. And if you want to get a good deal on a good bus, here are some things you might need to consider when making a choice. When buying a bus, the first decision you have to make is whether to buy a new or a used bus. Buying a used bus will be a lot less expensive than buying a new bus. If you decide to go for a used school bus, here are some things you might need to know to get the best deal.

Types of School Buses

Before buying a school bus, it’s good we know what we are buying. There are two types of school buses, which are the Conventional Buses and the Transit Style Buses.

Conventional Bus

These style of buses are the type that most school bus drivers are comfortable with. They are your conventional school bus, the ones you see on the streets most of the time. These have the advantage of good repairability as it is much easier for mechanics to work on. Their front wheel sits in front of the driver, along with the engine compartment and hood.

Transit Style Buses

This bus style has the same wheelbase length as a conventional bus but can seat more people. They can also be made on shorter wheelbases. There are two types of transit style buses. They

Rear engine buses

These type, as the name implies, have their engines in the rear. Drivers often prefer this type to the others because they do not have to experience the heat and noise from the engine. Unlike the other buses, the emergency doors are not at the back of the bus, but at the sides, which does affect the seating capacity.

Front engine buses

These style of Transit buses have their engines in the front, similar to the conventional school bus.

Things to keep in mind when buying a used school bus

Here are some things you much want to keep in mind when buying a used school bus

  1. The condition of the engine

Buying a used school bus can be like swimming in murky water, you don’t know what is coming. But checking the state of the engine should be a no brainer. You have to make sure your engine is in good condition before proceeding to buy.

Also, consider the terrain you would most be driving on, all buses are built to meet standard needs, but sometimes, you may need a more powerful engine.

Take into account how old the engine is and if it has been replaced or worked on. If it was replaced, try to find out if the replacement part was new or used. It is advised that you find a well-trained technician you can trust to inspect your engine so you don’t make a bad choice.

2. The history of the bus

When looking to buy a used school bus, looking at the bus’s history will help you out a lot. Try to find out about the details of the bus’s actual mileage, its service history, and if possible, the maintenance documentation of the bus as a whole. This would give you a clear idea of how the bus has been used, and how much usage you will get out of it. 

3.      Relevant laws and documentation

Always check for laws relating to buying a new or used school bus where you live. You want to make sure your school bus does not go against any laws before purchasing to avoid risk in the future.

Asking for and having proper documentation about the bus is also very essential. It can give you a time frame when the engine was replaced (if it was), which will help you calculate its future life span.

 Inspect the bus’s Body parts

Inspecting the body of your bus is essential for safety reasons. You have to do a thorough sweep of the bus.  Observe the body very closely, check for any rust, or corrosion, check the floor and the steps. You really can’t go wrong by being thorough. Having a trained bus technician do a DOT-type inspection will help you catch any little errors you might have missed or overlooked. 

  1. Safety Equipment

Another important thing you should keep in mind when purchasing, is if the school bus has any safety equipment or safety features. Ensure that the airbags, and anti-lock brakes, and any other safety features work. It is essential to put safety as a top priority to avoid any tragedy. You could have a tracking device installed on the school bus and a communication device with the driver. 

  1. Check for the availability of parts

It is important to know if parts for your school buses would easily be available before making a purchase. Older buses may require parts that are not widely available because of how old they are. Try to make sure you can easily get parts for your bus at a reasonable price if something goes wrong.

Buying school buses can be a lot cheaper than new ones, but can also be risky. Putting some of these tips to use will help you buy the best possible used school bus you can, so you won’t fall into problems because of a bad purchase decision.